1999 Corvette Coupe: with replace brake hoses with steel braided. Gravity bled. How to bleed with GM Tech2 successfully. all 4 corners as I replaced hoses.
1. Attached power bleeder and install hoses on all 4 bleeders to reduce chances of brake fluid going where I didn’t want !!!!
2. Attached Tech 2 followed someone else’s post on the steps (don’t remember who)
3. Powered on the Tech 2. Tech 2 passes power on self-test
4. Turn ignition to on position, did not start engine
5. Opened Tech 2 main menu The screen shows:
• F0 Diagnostics
• F1 Service Programming System
• F2 View Captured Data
• F3 GM Performance Parts Diagnostic
• F4 Tool Options
6. Selected F0, Diagnostics
7. Selected Model year (2000)
8. Selected Passenger Car
9. Selected F2 Chassis
10. Selected Product Line (Y) “establishing communication” seen on screen
11. Screen displayed: CAUTION: “ABS Braking is not available when ABS/TCS lamps are illuminated” (Note: I had no Codes related to the ABS or TCS and no light on the dash)
12. Pressed the “continue” key selection. The right-most softkey was highlighted.
13. Screen Reads: “Chassis”
• F0 ABS/TCS/Magnasteer
• F1 RTD
14. Selected F0, ABS/TCS/Magnasteer
15. Screen Reads:
• F0 DTC
• F1 Data Display
• F2 Special Functions
• F3 Snapshot
• F4 ID information
16. Selected F2 Special Functions
17. Screen Reads: (Note, I think I should have a function key at this step for Automated Bleed, but it is not there)
• F0 Automated Test
• F1 Solenoid Test
• F2 TCS Test
• F4 TCS Switch Information
• F5 Steering Position Sensor Test
18. Selected F0 Automated Test
19. Screen showed ready for test and a softkey highlighted for CONTINUE.
20. Pressed CONTINUE softkey
21. ABS pump activated for a second or two, and the car beeped twice, so I know the Tech 2 it talking to the car.
22. Then just followed the steps the Tech 2 showed, as you followed the steps you can hear and feel the pump and actuators cycling !!!!!!!
7. told me I was done !!!!!
My take !!!!!!! the fluid in my system was dark but did not look very contaminated, after the bleed process I am comfortable that my active handling is trouble free !!!! (had no issues to begin with, but never had to test on the road)
23. my opinion is a car that is subject to extreme conditions (hot and cold) may build up more condensation in the brake fluid thus rusting the EBCM parts ????
24. I purchased the Clone Tech 2 for this function alone, have now used it for various things and so glad I bought it !!!!!
1999 Corvette Coupe: with replace brake hoses with steel braided. Gravity bled. How to bleed with GM Tech2 successfully. all 4 corners as I replaced hoses.
1. Attached power bleeder and install hoses on all 4 bleeders to reduce chances of brake fluid going where I didn’t want !!!!
2. Attached Tech 2 followed someone else’s post on the steps (don’t remember who)
3. Powered on the Tech 2. Tech 2 passes power on self-test
4. Turn ignition to on position, did not start engine
5. Opened Tech 2 main menu The screen shows:
• F0 Diagnostics
• F1 Service Programming System
• F2 View Captured Data
• F3 GM Performance Parts Diagnostic
• F4 Tool Options
6. Selected F0, Diagnostics
7. Selected Model year (2000)
8. Selected Passenger Car
9. Selected F2 Chassis
10. Selected Product Line (Y) “establishing communication” seen on screen
11. Screen displayed: CAUTION: “ABS Braking is not available when ABS/TCS lamps are illuminated” (Note: I had no Codes related to the ABS or TCS and no light on the dash)
12. Pressed the “continue” key selection. The right-most softkey was highlighted.
13. Screen Reads: “Chassis”
• F0 ABS/TCS/Magnasteer
• F1 RTD
14. Selected F0, ABS/TCS/Magnasteer
15. Screen Reads:
• F0 DTC
• F1 Data Display
• F2 Special Functions
• F3 Snapshot
• F4 ID information
16. Selected F2 Special Functions
17. Screen Reads: (Note, I think I should have a function key at this step for Automated Bleed, but it is not there)
• F0 Automated Test
• F1 Solenoid Test
• F2 TCS Test
• F4 TCS Switch Information
• F5 Steering Position Sensor Test
18. Selected F0 Automated Test
19. Screen showed ready for test and a softkey highlighted for CONTINUE.
20. Pressed CONTINUE softkey
21. ABS pump activated for a second or two, and the car beeped twice, so I know the Tech 2 it talking to the car.
22. Then just followed the steps the Tech 2 showed, as you followed the steps you can hear and feel the pump and actuators cycling !!!!!!!
7. told me I was done !!!!!
My take !!!!!!! the fluid in my system was dark but did not look very contaminated, after the bleed process I am comfortable that my active handling is trouble free !!!! (had no issues to begin with, but never had to test on the road)
23. my opinion is a car that is subject to extreme conditions (hot and cold) may build up more condensation in the brake fluid thus rusting the EBCM parts ????
24. I purchased the Clone Tech 2 for this function alone, have now used it for various things and so glad I bought it !!!!!
1.SUPER MB PRO M6, with the strong penetration of wireless test and WIFI signal, relieves the dependency on communication transmission cable during test, and greatly reduces restriction on testing distance. The device, adopts the framework concept of original C6 diagnostic tool, is able to replace original MB Star C4. Durable and easy to carry. 2. SUPER MB PRO M6 is the only diagnostic tool on the market that is highly consistent with the original MB Star C6: 1) Fully compatible with the original software. 2) You can directly upgrade the newest firmware without installing additional driver.
3. ABS+PVT plastic structure adoption has the advantages as follows: 1) Impact-proof & easy to carry 2) Lower consumption on product shell against wireless signal 3) Great advancement of wireless communication distance & stability
4. SUPER MB PRO M6 adopts double-radiation mode (radiation fan & radiation fin). Radiation fan will automatically turn on high-power radiation mode when SUPER MB PRO M6 internal temperature over 35℃, greatly improving the stability and safety when programming.
5. Built -in network interface prevents deformation and damage from impact.
Look at the full package:
Contains: SUPER MB PRO M6 Main Unit, OBD2 16pin Cable, Lan cable, 38PIN Cable, 14PIN Cable and 4PIN Cable.
And look at the PCB board, it is good quality made.
عضو شوید
عضویت سریع
آمار مطالب
آمار بازدید
